VISCO.pump® - Space-optimised progressive cavity pump
The technology of the newly developed VISCO.pump® is based on the volumetric principle of an endless (infinite) piston whereas the core components rotor and stator form a perfectly sealed metering chamber. The eccentric movement of the rotor allows for a low-shear motion of the medium from one chamber to the next chamber without squeezing the media. The metering chamber is optimally designed for dispensing liquids and pastes containing fillers. The accuracy and repeatability is ± 1%.
During the development of the new progressive cavity pump VISCO.pump®, Beinlich Pumpen especially focused on the geometries of the pump as well as on the compensation of the inlet pressure. The aim of the development was and still is to significantly reduce the space and to bring a lightweight and space-saving solution on the market. By adjusting the rotor and stator geometries, Beinlich has already managed to design the VISCO.pump® smaller than previous systems. This is why VISCO.pump® is especially suitable for a use on small dispensing robots, since the centrifugal forces during fast, dynamic traverse distances have no influence on the pump.
The newly developed VISCO.pump® can be applied in many industrial areas. It is especially designed for precise dosing like e.g. bead or dot dispensing, as well as for fillings of cavities. Additionally, the pump can be used for the adherence of magnets for motors and loudspeakers, for LED strips, Glob Top, Dam&Fill, underfillings, for sealing of housings, for lubrication of motor shafts, for application of cooling pastes onto microchips or for dosing of PU.
Published: April, 14 2015